Breakout Board for micro:bit IO Expansion Board

From Elecrow
Jump to navigation Jump to search

Introduction

Microbit expansion board is an IO port expansion board that supports micro:bit. It can draw out all resources on the micro:bit and also has its own buzzer. Not only can it be connected to the P0 pin through a jumper cap, but it can also be released through the jumper cap. The small and unique size is very suitable for various small projects of micro:bit.

Model: DTS02018B

Breakout board for microbit.png

Features

  • All IO ports are led out
  • Comes with buzzer
  • With LEGO compatible latch holes
  • 3PN interface distinguished by yellow, red and black

Usage

For use with micro:bit, the connection is as shown below:

Micto-bit Connection.png

Then log in to the makecode website https://makecode.microbit.org/ and click on New Project.

New project.png

Example 1 digital output

1. Connect the positive and negative poles of the power supply and the IO port

Connection IO.png

2. Write a light program.

Light program.png

3. Running result

Result 1.png Result 2.png

Example 2 I2C mode

1. Add the i2c program module to makecode. Here we take oled as an example. Click "Extensions", enter OLED in the search box, and select the "oled-ssd1306" module.

Extensions.png

Oled-ssd1306.png

2. Connection module I2C interface

I2C.png

3. Write a program to display "Micro:bit"

Display micro bit.png

4. Run and check the display effect

Display effect.png

Retrieved from "http://wiki.elecrow.com/index.php?title=Breakout_Board_for_micro:bit_IO_Expansion_Board&oldid=8038"